Honda-SOHC

SOHC.co.uk Forums => CB350/400 => Topic started by: fat lad on February 11, 2008, 07:46:35 PM

Title: strip down
Post by: fat lad on February 11, 2008, 07:46:35 PM

Hi all, did the strip down today i have put a few pics here  http://gallery.sohc.co.uk/
i will add more later, regards jonny

Title: Re: strip down
Post by: dave400 on February 11, 2008, 08:34:28 PM

Quote from: fat lad on February 11, 2008, 07:46:35 PM

Hi all, did the strip down today i have put a few pics here  http://gallery.sohc.co.uk/
i will add more later, regards jonny

Looks like a good start point for a 400/4, I just wondered if those rubber blocks around the air intake worked? Looks like you had a go in the photos.

Dave

Title: Re: strip down
Post by: fat lad on February 11, 2008, 09:31:06 PM

Hi biffta i put the rubbers on when i first got the bike it had a fibre glass seat base and it was all cracked, i noticed it was virtually blocking the intake off, not sure if it did any good mind its was running rich before i stripped it, ill see how it goes after the rebuild, regards jonny