Honda-SOHC
SOHC.co.uk Forums => CB350/400 => Topic started by: AshimotoK0 on March 08, 2024, 10:19:47 AM
-
Does anyone have a decent pic of a 400F with the alternator loom clip fitted please. A photo of that oil pump area with the cover off (obviously) would be great. Revisiting my 1986 resto of my '75 400F and correcting things that I didn't fuss too much about when I was a younger man ! Where riding was more important than restoring.
-
Is this any use Ash?
[attach=1]
-
[attach=1]
-
Thanks Dean .. that's great.
-
The clip I found isn't correct ... must be off one of my other Hondas.
Can anyone take some measurements please so I can make one myself.
Looks like this:-
https://www.cmsnl.com/honda-cb350f-four-general-export_model14632/cramper-cord-c_32113333000/
[attachimg=1]
-
Due to shape probably easier with a couple of pics
Alan
[attach=1]
[attach=2]
-
Hi Ash.
Will need a clean, bit of heat and gentle persuasion to get back into shape and then plating. If you want it, PM me your details and I'll get it in the post.
[attach=1]
-
Thanks chaps.
Can I take you up on your kind offer please Dean. I will PM details.
-
Hi Ash,
Posted this morning. Only had a second class stamp though but hopefully you'll get it by Christmas.
-
Great stuff ... no rush.
-
Hi Ash,
Posted this morning. Only had a second class stamp though but hopefully you'll get it by Christmas.
Christmas 2025. ;D ;D ;D
-
Clamp arrived today thanks John (BTW... sorry for calling you Dean :-[ :-[ )
Spot on .. I will take dimensions of it and put a sketch on here just in case anyone else ever needs one plus a drawing of the other two points cable clips.
-
Good news Ash. Always worry about loosing bits in the post that aren't easy to replace.