Honda-SOHC

SOHC.co.uk Forums => CB350/400 => Topic started by: Davelu88 on October 09, 2018, 09:54:05 PM

Title: Fitting exhaust 400/4
Post by: Davelu88 on October 09, 2018, 09:54:05 PM
Hi All , this may be a stupid question but its bothering me. At the mo i have a motad but when im looking at an original exhaust with collector box it looks like 2 downpipes are fixed, if this is so how do you get the finned clamp on ?
Title: Re: Fitting exhaust 400/4
Post by: AshimotoK0 on October 09, 2018, 10:01:44 PM
Finned clamp fits over pipe and two collets secure pipe.

Searchable manual in my Dropbox here:-

 https://www.dropbox.com/s/j0hysqub5jsfg46/400-4%20Part%20List%201975%20searcheable.pdf?dl=0


[attachimg=1]
Title: Re: Fitting exhaust 400/4
Post by: Davelu88 on October 09, 2018, 10:23:31 PM
Many thanks Ash it makes sense now
Title: Re: Fitting exhaust 400/4
Post by: Athame57 on October 10, 2018, 08:03:31 AM
I havn't got those gaskets in mine, they got so chewed up putting them in I gave up. Does it matter very much?
Title: Re: Fitting exhaust 400/4
Post by: AshimotoK0 on October 10, 2018, 08:12:55 AM
I havn't got those gaskets in mine, they got so chewed up putting them in I gave up. Does it matter very much?

Yes ..you should have them to get a decent seal.
Title: Re: Fitting exhaust 400/4
Post by: hairygit on October 10, 2018, 08:18:25 AM
Yes, otherwise it will be noisy, like a tractor at idle, and will pop and bang when shutting down the throttles, not good on a Honda!

Sent from my X6pro using Tapatalk

SimplePortal 2.3.5 © 2008-2012, SimplePortal