Honda-SOHC
SOHC.co.uk Forums => CB750 => Topic started by: Corascate on May 08, 2020, 08:23:03 PM
-
Hi all
I am going to weld the brackets back on the frame so that I can use it as it should be used.
My problem is that the Haynes manual gives measurements of 361mm (front mount to stand mount and 124 from a bolt above it on frame to stand mount )but. When I use a tape measure I can’t get both measurements to coincide .
Can anybody tell me what the measurements should be. Or even better could they make a template that could be emailed / posted to me and I could then get them in the correct place.
It wasn’t me who cut them off.
God knows why the previous owners cut them off but it wasn’t me.
I have looked through Bryanj (the oracle)microfiches and could not find anything.
The pics show one bracket held in position by cabletie and the other ready for when I have the correct measuement
Any advice is welcome
Thanks
Steve