This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Moorey
Pages: 1 2 [3] 4 5 ... 110
31
« on: January 20, 2024, 10:04:31 AM »
Typically mc fuel pumps delivers 3psi. Float valves are generally overcome at approx 4.5 / 5psi. 1ft head of water gives 0.433psi do the maths.
One thing many don't think of is that in use float valves open very tiny amounts so the smallest of debris is likely to stay in the valve and never
be flushed through unless the carb is drained or stripped and cleaned properly.
Anyone wanting to check simply put a airline with a pressure reg on a upside down carb on the carb inlet and see at what point the valve leaks
air when using leak detector spray.
32
« on: January 19, 2024, 06:30:46 PM »
There are plenty on Aliexpress for a couple of quid 34mm centres
33
« on: January 17, 2024, 06:30:17 PM »
I've had them for years sizes from 6" to 18" and only ever broken one and that was with total abuse using a 4ft length of 2" pipe on A 15" one I
had cut an extra tooth on the movable jaw enabling it to open wider than they are designed to do. Carrying a 10" and !5 " on your belt was a very
common practice in pits to save carrying a heavy bag of spanners for miles. I must still have 7 or 8 of them in varying sizes.
34
« on: January 14, 2024, 07:49:39 PM »
Welcome to the forum another 350f owner here. 
35
« on: January 12, 2024, 08:06:11 PM »
I must be doing Ok then as I still do my own and carry a pair of levers under the seat in case of punctures.
36
« on: January 10, 2024, 09:48:13 AM »
I have an old roll of Alan Watson Motorcycles, Dewsbury somewhere. Honda dealer on Bradford rd Dewsbury it was just down the road from
Padgetts
37
« on: January 05, 2024, 09:39:04 PM »
Don't give up and don't take a backward step Phil. I was given 1 to possibly 4 years, now on 12 years 4 months and I do keep count. Nothing is
set in stone. Stay strong it's not the easiest of rides.
38
« on: January 02, 2024, 11:03:38 AM »
Welcome to the forum
39
« on: December 31, 2023, 04:32:51 PM »
The ends on a lot of thread files but not all are made for doing internal threads.
40
« on: December 31, 2023, 03:50:33 PM »
Just to add the one on mine that I bought from you James has a OD 7 1/8th 182mm and the headlight adj on the RH side as sat on the bike. USA
.model
41
« on: December 30, 2023, 11:10:44 AM »
Welcome to the forum.
42
« on: December 24, 2023, 10:44:58 PM »
Merry Christmas and welcome to the forum.
43
« on: December 24, 2023, 10:42:23 PM »
Welcome to the forum and have fun. Merry Christmas 
44
« on: December 11, 2023, 07:55:17 PM »
Welcome to the forum and have fun.
45
« on: December 04, 2023, 10:06:36 PM »
Birmingham area I believe.
Pages: 1 2 [3] 4 5 ... 110
|
Show Posts