Honda-SOHC
SOHC.co.uk Forums => CB750 => Topic started by: brodsord on January 20, 2020, 07:25:43 PM
-
Hi all,
Can anyone tell me if the bottom engine hanger bolt for a CB750 f2 is longer than the same bolt for a CB750 k5 ?
Also is there difference in the long front engine hanger bolt between those two models?
Many thanks
Sent from my iPhone using Tapatalk
-
I do not have personal experience, but I would look at spare parts catalogue to check first. Shall be clearly visible there
Odoslané z SM-G930F pomocou Tapatalku
-
I have 750K bolts, if you would like the length. The front lower is 90152300010 for the K and F1 and F2 ;)
-
I have 750K bolts, if you would like the length. The front lower is 90152300010 for the K and F1 and F2 ;)
Thanks very much Trigger.
I’m doing a build which is a f2 frame and a k5 engine.
The rear bottom bolt seems to be to short by the time it goes through the frame then out the aluminium peg mounting blocks.
I haven’t got enough thread to mount the forward foot rests, I got the bike as just a rolling frame and engine it had nothing else so I’ve been slowly sourcing parts and putting here back together and the front mount is just a bit of m10 threaded rod, do you have a spare rear lower and the front clutch side bolt for sale at all?
Sent from my iPhone using Tapatalk
-
I do not have personal experience, but I would look at spare parts catalogue to check first. Shall be clearly visible there
Odoslané z SM-G930F pomocou Tapatalku
Thanks Erny
Sent from my iPhone using Tapatalk
-
The bottom rear is unique to the 750F2, none of the other SOHC 750's use those alloy footrest brackets. Try D.K. spares or similar for one.
Sent from my POT-LX1 using Tapatalk
-
The bottom rear is unique to the 750F2, none of the other SOHC 750's use those alloy footrest brackets. Try D.K. spares or similar for one.
Sent from my POT-LX1 using Tapatalk
Thanks pal, I think the bolt that’s there must be of an earlier model, the bike is a bit mix and match
Sent from my iPhone using Tapatalk
-
I have 750K bolts, if you would like the length. The front lower is 90152300010 for the K and F1 and F2 ;)
Thanks very much Trigger.
I’m doing a build which is a f2 frame and a k5 engine.
The rear bottom bolt seems to be to short by the time it goes through the frame then out the aluminium peg mounting blocks.
I haven’t got enough thread to mount the forward foot rests, I got the bike as just a rolling frame and engine it had nothing else so I’ve been slowly sourcing parts and putting here back together and the front mount is just a bit of m10 threaded rod, do you have a spare rear lower and the front clutch side bolt for sale at all?
Sent from my iPhone using Tapatalk
If you contact the Nurse, she will check the stock. I have seen a 750K lower front and a rear hanger bolt about ;)
-
I have 750K bolts, if you would like the length. The front lower is 90152300010 for the K and F1 and F2 ;)
Thanks very much Trigger.
I’m doing a build which is a f2 frame and a k5 engine.
The rear bottom bolt seems to be to short by the time it goes through the frame then out the aluminium peg mounting blocks.
I haven’t got enough thread to mount the forward foot rests, I got the bike as just a rolling frame and engine it had nothing else so I’ve been slowly sourcing parts and putting here back together and the front mount is just a bit of m10 threaded rod, do you have a spare rear lower and the front clutch side bolt for sale at all?
Sent from my iPhone using Tapatalk
If you contact the Nurse, she will check the stock. I have seen a 750K lower front and a rear hanger bolt about ;)
Will do Trigger.
Thanks
Gray
Sent from my iPhone using Tapatalk