Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - RoytheBoy

Pages: [1]
1
CB750 / K7 weird electrical fault
« on: June 21, 2023, 09:40:09 PM »
Hopefully someone can point me in the right direction.......The tail light on my CB750 has stopped working,
the light works as I've taken it off to check connections & tried it direct to a battery,
I have continuity through the wiring (inc fuse & switches)
I thought it must be an earth fault (most likely), but that's fine too!!

so now I'm stumped.......

cheers

2
CB750 / Problem with solid state Reg/Rect unit
« on: May 15, 2018, 08:48:01 PM »
I have fitted a solid state unit to a 750 K7 but can't get the Regulator part to work (I have tried two units now & same thing)......however, I have plugged in the old regulator into the black/white wires (with SS Rect unit still fitted) & it works fine?????

anyone else had this problem & how was it fixed?

cheers

3
CB750 / K7 Wheels
« on: October 29, 2015, 12:16:02 PM »
Hi all,

couldn't find anything on the forum about K7 wheels, (so apologies if it is there somewhere....), so firstly, can I fit wheels from another model (i.e F2 or other)? & would it make any difference as the K7 has a 17" rear wheel (why??)?

reason is my wheels are not in great condition & rear, K7, wheels difficult (& expensive)to get hold of.......

cheers

4
CB750 / Broken piece of sprocket in sump pan - help please
« on: October 02, 2015, 04:27:13 PM »
Found what looks to be a broken piece of sprocket in the sump pan, scoured the parts & workshop manuals but not easily identifiable (maybe cam sprocket??), however, bike runs/ran nicely when I got it with no unusual sounds - in fact, sounded very nice so maybe something from the past? Hopefully pics attached.......

help identifying it would be great, thanks

5
CB750 / CB750 K7 Brake calipers
« on: August 25, 2015, 12:11:45 PM »
Hi, I have acquired a K7 which has been fitted with a double disc set up, unfortunately both are seized & as yet, not been able to get the pistons out!!!!

My question is (& not found on the forum anywhere), could I retro fit calipers easily from another model? (even a double piston unit....)

cheers

Pages: [1]
SimplePortal 2.3.5 © 2008-2012, SimplePortal