This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Moorey
Pages: 1 ... 5 6 [7] 8 9 ... 110
91
« on: April 26, 2023, 06:41:36 PM »
That seems cheap if you get one let us know what you think to the quality.
92
« on: April 11, 2023, 08:17:34 PM »
The Zero Avia did their first Hydrogen powered fight earlier this year at Cotswold Airport.
93
« on: March 29, 2023, 09:31:12 PM »
I did the CB400 superfour over 12months ago with the POR15 kit to stop a leak under the paint from a previous repair someone had done and it has been very successful saving having to have a full repaint.
94
« on: March 15, 2023, 11:13:56 PM »
I would be giving ATF Dexron 2 a try.
95
« on: March 14, 2023, 01:16:22 PM »
96
« on: March 14, 2023, 01:14:00 PM »
97
« on: March 14, 2023, 12:38:51 PM »
That's not Yorkshire he hasn't got shorts on. 
98
« on: March 13, 2023, 03:05:41 PM »
I have had a look about for a 750F1 air box to try a K seal on but, don't have one here mate, sorry 
Not to worry I will see what the postman brings.
100
« on: March 13, 2023, 01:34:39 PM »
Here you go mate, as discussed. Very soft rubber and this a new one for a CB750K.
Cheers mine has swollen considerably.
101
« on: March 13, 2023, 09:44:28 AM »
Approx 7mm wide 6mm high
(Attachment Link)
(Attachment Link)
Looks the same U section as the 750k but, can not find a part number for the 750F1 to compare.
I could never find a U section rubber from any manufacture when i was looking to replace a 750K one. Ended up buying a Honda one
No it's not listed as a separate item. I have found some rubber section that looks quite promising and may need a trim with a blade but I need to measure up properly as the existing bit of seal is quite swollen. The carbs have been passing over the last couple of weeks and filled the air box with fuel knackering the seal and air filter.
102
« on: March 12, 2023, 08:53:23 PM »
Aaah, yup, I feel your pain
Sent from my iPhone using Tapatalk
Getting closer now I know the profile description Small Square U Seal. Now seeking one in a suitable material.
103
« on: March 12, 2023, 07:54:04 PM »
I've nothing but if I got desperate, I'd be looking at sliding door seals or similar to maybe modify. Getting something that shape might be tricky though.
I'm getting fed up with looking at seal profiles. It could end up with me making one with black Sikaflex
104
« on: March 12, 2023, 05:51:42 PM »
Approx 7mm wide 6mm high
[ Guests cannot view attachments ]
[ Guests cannot view attachments ]
105
« on: March 12, 2023, 03:35:48 PM »
Does anyone have or know of a air cleaner box seal for the two halves of the box for a 750f1 they a different to the K series Or any suitable seal material to make one out of as mine seems to have turned into jelly.
Pages: 1 ... 5 6 [7] 8 9 ... 110
|
Show Posts
