This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Topics - tworiversuk
Pages: [1]
1
« on: February 15, 2010, 05:40:05 PM »
Hi All,
does anyone know where I can get hold of stainless footrest springs for the front footrests on my CB750K7
THANKS FOR YOUR HELP
2
« on: May 01, 2009, 06:15:01 PM »
Hi All,
has anyone fitted a rear Givi/monokey rack to a cb750K7 , I ask this knowing they are not available for this model ,but knowing you enterprising people someone may have adapted one from another model.The side arms are the only part to adapt.I thought if I could find a pair straight and long enough, bolt them to the shocker top bolt and I could make a small plate to fit to the rear fender bolt and bob's your uncle.Anyone tried and sorted it ?
Mike
3
« on: January 25, 2009, 03:18:25 PM »
Hi guy
just a couple of shots after my ride to Instow in Devon
4
« on: December 03, 2008, 02:45:36 PM »
Hi,
can anyone shed some light on the type of key my bike requires ,I have one key and need another blank to have cut, David Silvers says it's a type 'A' OR 'B' any idea's it has the groove on the right hand side and the number is 3 digits long no letters
mike
5
« on: November 03, 2008, 05:58:38 PM »
has anyone got 2 chrome rings for the speedo and tacho clocks, rebuilt mine and totally trashed the rings, ,used the pry off soloution should have used the cut and jb weld solution, will buy the whole clocks if I have too
Mike
6
« on: October 26, 2008, 06:14:01 PM »
Hi Guys,
Anyone got the lower front engine bolt, the log one that goes under and through the engine, lying around in there workshop Honda part number 90152300010, just stripped mine ,recut it smaller and stripped it again,if you have one contact me direct on, michael.t.baldwinATbtinternet.com, with a price inc postage to devon
cheers
Mike
Edited by SteveD: Changed the email address to keep the webbots at bay...
7
« on: October 02, 2008, 08:08:07 AM »
Hi boys and girls,
just started my resto of the CB750K7 I bought 6 months ago, when I figure out how to put pictures in my posts I will do so.I will I am sure need your help along the way, I have sent the carbs off to be stripped and vapour blasted and rebuilt with brand new internals,stripped all the oil tank and lines,left side electric panel and battery tray,seat ect off, tonight the engine will come out ( I hope ) made up my engine stand as seen on this site, ready for the paint job, so come alomg with me and see how I get on
Mike in Devon ( UK )
8
« on: August 04, 2008, 08:05:07 AM »
Hi ALL
has anyone got a K7 owners manual for sale? must be good nick also anyonw know where I can get the sticker from that fits on the chain guard to warn about the chain been a 'o' ring type and not to power wash it
mike
9
« on: June 11, 2008, 03:08:36 PM »
can anyone shed some light on a problem I have, the wheel hub on the K7 looks like it's got the two side flanges and is joined between them by 6 ribs corrasponding to the 6 bolts, can I use a older hub as I have one polished up and it is the same design as the back wheel hub, a series of rings running round the hub, also I need the spacer between the bearing if anyone has one for sale
Mike in devon
10
« on: June 11, 2008, 08:08:27 AM »
it was registered IN THE uk on 19-03 80,making it a 'V' registration, engine number ;CB750E-2736355 FRAME NUMBER ;CB750K-2735369 ,color excel black, oil tank hidden behind side panel, 17" rear wheel,according to this info it's a 1977 but registered late in 1980 , but still a K7 http://www.sohc4.net/index.php?title=CB750K7
11
« on: March 19, 2007, 02:28:24 PM »
Hi,
looking to buy a K7 what should I be aware of please, it's the one for sale at motorcycles unlimited
Pages: [1]
|
Show Posts