Honda-SOHC

SOHC.co.uk Forums => CB350/400 => Topic started by: waffey on March 11, 2018, 08:57:30 AM

Title: Frame ID Plate
Post by: waffey on March 11, 2018, 08:57:30 AM

Hi

another question. The frame ID plate, what does everyone do with it when restoring the frame. Remove it before working on the frame or protect it? It looks like a couple of rivets hold it on.

Title: Re: Frame ID Plate
Post by: Nurse Julie on March 11, 2018, 09:24:13 AM

You can either put it back on with new rivets when the bike is finished or not bother as the VIN in stamped into the headstock as well.

Title: Re: Frame ID Plate
Post by: waffey on March 11, 2018, 09:28:09 AM

thanks nurse Julie

Title: Re: Frame ID Plate
Post by: hairygit on March 11, 2018, 09:35:46 AM

It has a sticky glue as well as rivets, so be careful taking it off, easy to buckle it up and ruin it. If you have the frame powder coated it usually renders the number on the headstock unreadable, so it's worth putting the plate back on, avoids aggro if you get pulled by a grumpy copper!

Sent from my X6pro using Tapatalk