Honda-SOHC

SOHC.co.uk Forums => CB750 => Topic started by: Arch stanton on November 03, 2018, 02:30:52 PM

Title: 750k1 wheel spindle binding?
Post by: Arch stanton on November 03, 2018, 02:30:52 PM

Just trying to install the front spindle.
But as soon as I get the spindle nut even hand tight.
The spindle binds.
Anyone any ideas what may be wrong?
Sean.

Title: Re: 750k1 wheel spindle binding?
Post by: hairygit on November 03, 2018, 02:33:47 PM

Try putting the nut on the other way round !

Sent from my X6pro using Tapatalk

Title: Re: 750k1 wheel spindle binding?
Post by: Arch stanton on November 03, 2018, 02:50:34 PM

The nut is the right way. Spanner side inwards.

Title: Re: 750k1 wheel spindle binding?
Post by: Bryanj on November 03, 2018, 03:09:57 PM

Speedo drive not located correctly or bad bearings

Title: Re: 750k1 wheel spindle binding?
Post by: Arch stanton on November 03, 2018, 03:36:26 PM

Everything looks to be good.
But something obviously isn't.

Title: Re: 750k1 wheel spindle binding?
Post by: Arch stanton on November 03, 2018, 04:12:08 PM

All sorted now.
It was only one of those Derrrr! Moments that strike when too tired.
Thank you any way.
Sean.

Title: Re: 750k1 wheel spindle binding?
Post by: Bryanj on November 03, 2018, 04:14:54 PM

So do tell!!

Title: Re: 750k1 wheel spindle binding?
Post by: Arch stanton on November 03, 2018, 05:21:34 PM

Double discs convertion bolts in the wrong way round.
So the nuts caught the speedo drive.
Derrrr!