Honda-SOHC
SOHC.co.uk Forums => CB750 => Topic started by: martin_uk on March 27, 2019, 05:50:33 PM
-
Working on my fourth and final CB750 SOHC and need an engine gasket kit preferably with the cylinder stud packers/seals.
Previously bought from Cruisin Image, but prices seem to have gone up alot. :o
Vesra ref is VG-157 and hoping to find a set at sub £50 delivered 8)
Any suggestions
-
I used a Vesrah Kit, from D Silver, I think, which had everything, including seals, O rings and rubber pucks that I needed, however on the strong advice of the sages on this board I used a genuine Honda head gasket, which was visibly much higher quality, with a 'sticky'coating, and you don't want to take the engine out again if it fails.
Mine came from CMS, I'm afraid the price will make your eyes water, though, over £100 with VAT and carriage.
-
You won't find a VG-157 under £50. You will find them a tad over in the states but, with P&P and customs you will find one at that price in europe ;)
-
Thanks for the suggestions guys