Honda-SOHC

SOHC.co.uk Forums => CB500/550 => Topic started by: SteveW on February 17, 2020, 05:57:45 PM

Title: Tool tray net
Post by: SteveW on February 17, 2020, 05:57:45 PM: I have been looking for one of these for a while, part number 83502323000 but without any luck so though I'd make one.

Didn't have any dimensions so worked them out from the air box lid and designed the cover on a 3D cad package.
Sent the image to a 3D printing company and got this back today. Fitted a piece of stainless mesh into it and hey presto:
Title: Re: Tool tray net
Post by: Nurse Julie on February 17, 2020, 05:58:53 PM: I sell the mesh on my ebay page and RGP 750 makes the complete thing 😊😊😊😊
Title: Re: Tool tray net
Post by: Rob62 on February 17, 2020, 07:15:19 PM: Nice work... 8)
Title: Re: Tool tray net
Post by: SteveD CB500K0 on February 17, 2020, 07:30:00 PM: That is nice.

It's great to have a few differnt sources (Rich made me one)

Steve
Title: Re: Tool tray net
Post by: Nurse Julie on February 17, 2020, 07:32:37 PM: Agree, great that people make things. I'm mightily impressed with all this CAD and 3D printing produced stuff, I haven't got a clue what it is all about but I'm very impressed by the people who can use it to make things.
Title: Re: Tool tray net
Post by: jon stead on February 17, 2020, 08:53:01 PM: Quote from: SteveW on February 17, 2020, 05:57:45 PM
I have been looking for one of these for a while, part number 83502323000 but without any luck so though I'd make one.

Didn't have any dimensions so worked them out from the air box lid and designed the cover on a 3D cad package.
Sent the image to a 3D printing company and got this back today. Fitted a piece of stainless mesh into it and hey presto:

I had the same idea, posted it here.

http://www.sohc.co.uk/index.php/topic,15159.msg125297.html#msg125297

I went the whole hog and had the mesh 3D printed as well.