Honda-SOHC

SOHC.co.uk Forums => CB350/400 => Topic started by: taysidedragon on August 21, 2021, 12:53:28 AM

Title: Starter motor cable
Post by: taysidedragon on August 21, 2021, 12:53:28 AM: Quick question; I went to connect the power cable to the starter motor terminal and I can't remember the sequence for the washers.

I've got an insulating washer on the base, next to the casing. Then the cable fixing, then a flat metal washer, a small lock washer, then the fixing nut on top.

Is that right? Should have noted the order when I took them off, but didn't for some reason. 🙃
Title: Re: Starter motor cable
Post by: McCabe-Thiele (Ted) on August 21, 2021, 02:14:39 AM: That's what mine is but it has been removed previously by the PO so can't be 100% but sounds logical.

I'm finding I did not take enough photos before I took stuff apart!

I've just found a tub with some odd looking rubber fitments - at present I have no idea what I took them off - eventually I might have to take a photo & ask but am conscious I ask too many questions as it is.
Title: Re: Starter motor cable
Post by: Bryanj on August 21, 2021, 09:16:28 AM: Never too many Ted, ive been doing Hondas since 73 and still learning
Title: Re: Starter motor cable
Post by: 4wDaz on August 21, 2021, 10:10:54 AM: Mine has insulating washer, thin washer, spring washer, half nut, cable, spring washer then half nut

(https://i.ebayimg.com/images/g/EPQAAOSwqfNXl1DE/s-l1600.jpg)
Title: Re: Starter motor cable
Post by: taysidedragon on August 21, 2021, 11:03:58 AM: Thanks guys. I should be OK now. I'll fit the 2 half nuts as in the photo.