Honda-SOHC
SOHC.co.uk Forums => CB750 => Topic started by: philward on June 07, 2019, 09:12:45 PM
-
Has anyone got a servicable centre tube out of the swing arm pivot for a 750K6 that they are willing to sell me? The project K6 I'm working on has it missing. Part number 52141390000
Thanks
Phil
-
Fairly certain you can use the earlier one with the grease grooves which last time i looked was still available.
-
I have just found a swing arm tube that I think is from a 900 that has same internal/external sizes but is longer. To save me stripping the K2 or CR swing arms to measure the size, has anyone got one that is off the bike that they can measure the length for me please?
Thanks
-
I have just found a swing arm tube that I think is from a 900 that has same internal/external sizes but is longer. To save me stripping the K2 or CR swing arms to measure the size, has anyone got one that is off the bike that they can measure the length for me please?
Thanks
Phil, if you cant wait till later, I will measure mine as my K2 is all stripped.
-
Thanks Julie, no rush as I need to fit the bushes I've just ordered from you and paint swing arm
-
Thanks Julie, no rush as I need to fit the bushes I've just ordered from you and paint swing arm
👍👍👍
-
The one from my K5 is 232mm, measured with a rule. I can measure more accurately at work if you need. Are K5 and K6 the same...?
Cheers
Phil
-
Hi Phil,
My K4 Swing Arm Tube is 232mm Long X 21.26mm O/D X 14mm I/D.
Good luck.
-
Thanks Julie - much appreciated