Honda-SOHC

Other Stuff => Tricks & Tips => Topic started by: Crispy on April 22, 2018, 09:09:16 PM

Title: Wheel bearing retainer removal
Post by: Crispy on April 22, 2018, 09:09:16 PM

This worked quite well...I used an adjustable angle grinder spanner tapped into the cut out sections on the retainer to remove it, after drilling out the stakes. Worth a go if you have one lying around!

Title: Re: Wheel bearing retainer removal
Post by: Green1 on April 22, 2018, 10:45:35 PM

That's what I did with mine Great minds think alike.  ;)

Title: Re: Wheel bearing retainer removal
Post by: Moorey on April 23, 2018, 11:28:00 AM

Or if you haven't got one of those. I use a couple of bolts or suchlike that fit the holes fastened in the vice and turn the wheel to undo. Remember to drill out the centre punch marks or you will rip out the threads.  :) ;)