Honda-SOHC
SOHC.co.uk Forums => CB350/400 => Topic started by: llessur on June 10, 2018, 12:52:33 PM
-
Can anyone please point me towards a supplier of the M10 x 1.25 clutch cable adjuster that sits on the clutch casing. - been struggling with this for several months now to the point it has become one of the last jobs to get the bike finished.
-
Have you tried http://www.400fourbits.co.uk ?
Ian
-
No joy there I'm afraid. but Steve has helped me with many other bits
-
Is yours missing or just not upto standard? You don’t actually see the hex on the adjuster as it’s covered with a sleeve, only the nut is visible. It’s not a difficult item to make on the lathe but I don’t have a 1.25 die, only the more normal 1.5. A local engineering shop might help you - I can supply dimensions. I would go stainless if I was making one but make sure you put copper slip or similar where it goes into the alloy cover.
Ian
-
Hi, maybe a very nice Aftermarket Stainless steel version from Kevin (TTR400).
Kind regards,
Emiel
-
I got a stainless one from Phil Denton a few years ago. It was reasonably priced, even shipped to Oz.
https://www.phildentonengineering.com/index.html
Cheers,
Justin
-
I have one if you are interested