Honda-SOHC

SOHC.co.uk Forums => CB750 => Topic started by: MarkCR750 on September 30, 2018, 04:47:36 PM

Title: Valve clearance check
Post by: MarkCR750 on September 30, 2018, 04:47:36 PM

Hi all, I just checked my valve clearances, inlets were 0.05mm but all exhausts were in excess of 0.10mm, Haynes says 0.05mm for inlets,  0.08mm for exhausts, please could someone confirm the Haynes figures are correct, it’s a K6 750 engine, cheers Mark.

Title: Re: Valve clearance check
Post by: K2-K6 on September 30, 2018, 05:17:40 PM

Honda manual says the same as you've got.

So all good from that perspective.

Title: Re: Valve clearance check
Post by: Nurse Julie on September 30, 2018, 05:32:49 PM

Graham sets them at 0.05 and 0.08 on the CB750's.

Title: Re: Valve clearance check
Post by: MarkCR750 on September 30, 2018, 05:43:36 PM

Thanks both