Honda-SOHC
SOHC.co.uk Forums => CB750 => Topic started by: Phil A on October 29, 2018, 10:00:13 AM
-
I think I know the answer to this, but just in case I’m going to ask anyway.
I took the exhaust off, one side, so I could refit the centre stand. I thought it might be difficult to remove but the nuts came undone very easily. There is no copper gasket/ oring fitted. The exhaust fitted is an aftermarket 2 - 1. I’m not sure of the make.
So my question is should I fit copper gaskets when I refit the exhaust?
-
Yes, probably meant to be there but whoever fitted the pipes didn't bother!
Sent from my X6pro using Tapatalk
-
That’s what I’m thinking to.
-
If you look closely they are there but look like carbon and probably as hard as concrete
-
If you look closely they are there but look like carbon and probably as hard as concrete
You’re right I didn’t look closely enough. I have managed to get them out so can fit new ones. Thanks.
-
Am i allowed the told you so dance as expertly performed by my dearly beloved (FREQUENTLY)
-
Only if you post a video.
Sent from my iPhone using Tapatalk
-
Am i allowed the told you so dance as expertly performed by my dearly beloved (FREQUENTLY)
Oh go on then (but not for too long).