Honda-SOHC

Hi Skoti, you could also try www.z1enterprises.com they are based in the US i have used them before with no problems   cheers mick.

Good web site at Z1 enterprises, they detail the length of two different clutch cables listed for the F1. The smaller of the two will do me just fine  Thank you Mick.

I had been going to suggest Venhill Engineering www.venhill.co.uk until I realised where you are based.

I'll be in the UK next week, but I see Venhill don't list any cables on their website for CB750F1/F2 

Hi,

freight will not be an issue whatsoever, I shall be arriving in the UK by ferry to Hull on 18.2.2010 and will bring the fairing with me if anyone wishes to purchase.
I will be driving north up the A1/M and could arrange to deliver or meet a prospective buyer en route.

I see the picture of your bike looks like it has the same fairing, maybe you had experience with the cracked screen problem before?   

Hi,

thanks for your help, will probably take your advice and change the rear sprocket 

Hi,

I want to up the gearing on my F1 but I'm not sure if there's enough space for a larger front gearbox sprocket.
The front sprocket is cheaper and easier to change than the rear sprocket so can anyone advise me if there is enough space to replace the standard 17 tooth front gearbox sprocket with say an 18 tooth sprocket without the chain fouling the sprocket cover mounting lugs etc ?    

Ahoj,

I've recently bought a 1976 CB750F1 from an old friend which has been stored for the last 10 years. It runs but needs some work. It's the first Honda Four I've owned so you may hear more from me in the way of technical advice required!   

yours hopefully

Skoti