Honda-SOHC
SOHC.co.uk Forums => CB750 => Topic started by: alexojones on March 03, 2018, 07:02:43 PM
-
Anyone know where I can get a replacement baseboard cover / sticker for a 1978 CB750K ( American import ) but I think the part would be same a UK version or would I have to buy a whole new Dashboard! Thanks Alex
Sent from my iPhone using Tapatalk
-
you mean the bit that covers the idiot lights? i'm pretty sure you can get them on ebay or david silver.
-
you mean the bit that covers the idiot lights? i'm pretty sure you can get them on ebay or david silver.
Yep that’s the one , I’ve tried David Silver and I can’t seem to find one on eBay I can only see the oblong ones for later models , thanks for advise though.
Sent from my iPhone using Tapatalk
-
Are you on about this type ? if so contact a member by the name of Piki, he can make a decal ;)
https://www.ebay.co.uk/itm/Honda-CB400-F-Warning-Light-Cover-Ignition-Oil-Neutral-CB400f-cb750-500-550-/112235025996?hash=item1a21ba964c
-
Are you on about this type ? if so contact a member by the name of Piki, he can make a decal ;)
https://www.ebay.co.uk/itm/Honda-CB400-F-Warning-Light-Cover-Ignition-Oil-Neutral-CB400f-cb750-500-550-/112235025996?hash=item1a21ba964c
Great thanks , that’s the type . I’ll contact them now .
Sent from my iPhone using Tapatalk
-
Are you on about this type ? if so contact a member by the name of Piki, he can make a decal ;)
https://www.ebay.co.uk/itm/Honda-CB400-F-Warning-Light-Cover-Ignition-Oil-Neutral-CB400f-cb750-500-550-/112235025996?hash=item1a21ba964c
Great thanks , that’s the type . I’ll contact them now .
Sent from my iPhone using Tapatalk
Possible alternative source for the label:
https://www.ebay.ie/itm/HONDA-CB750F1-CB750F2-CB400F-CB550F-CB250G5-CB360G5-CONSOLE-COVER-LAMP-DECAL/162746623150?hash=item25e47464ae:g:gCgAAOSw~OVWv18E
-
These warning light cover are a pattern part, quite OK but you need to check the lenses are secure in the cover as they have been known to fall out. A spot of two part resin adhesive on the inside around the lens corners would be a wise move. Re-fitting with the correct screws is important.
-
These warning light cover are a pattern part, quite OK but you need to check the lenses are secure in the cover as they have been known to fall out. A spot of two part resin adhesive on the inside around the lens corners would be a wise move. Re-fitting with the correct screws is important.
Thanks for the advise , much appreciated , I’ve ordered one and will use the resin adhesive.
Sent from my iPhone using Tapatalk