Honda-SOHC
SOHC.co.uk Forums => CB350/400 => Topic started by: allankelly1 on November 14, 2021, 12:38:17 PM
-
Hi all
Just wondered please if anybody has a old CB400F fork top bolt
Condition is unimportant as want to see if I can make up a pair of adjustable preload units for the old girl using this example for my base design
Many thanks in advance
Best wishes Al
Sent from my iPhone using Tapatalk
-
Hi Allan,
I have one from a CB200. I'm 99% certain it's the same part as the 400. Could check on DS or CMS. It's somewhere in the back of the shed, if you can hang on until tomorrow I will dig it out.
-
Just checked on CMS, the 200 and 400 have the same part number 9460527101.
-
Hi dean
Thanks for your offer
If you find just pm me my your PayPal details and how much and I will send back my address so I can cover at lest postage cost
Just going to look at making a pair of these so I can play around with my spring preload rather than a fixed length spacer
Thanks again Al
(https://uploads.tapatalk-cdn.com/20211114/8e95cb839e142d6184c958e01dd0bda3.jpg)
Sent from my iPhone using Tapatalk
-
Hi Allan.
Will PM you.
[attach=1]