Honda-SOHC
Other Stuff => Misc / Open => Topic started by: Johnny4428 on December 21, 2021, 11:45:13 AM
-
Quick question! Lube or no lube? Maybe a little on the cable end but not on the bars? I’ve not had any bother in the past but just wondered about the correct or recommended application.
-
I've always put a smear of light oil on the bar, not sure if it's necessary, but never caused a problem.
-
Always lube the bars myself. Usually silicon grease or oil.
-
I used Silicone Spray lubricant after thorough cleaning.
I use silicone spray instead of grease on my garage door mechanism as it does seem to attract the dirt & clog like normal oils & grease.
-
Thanks guys, I have fitted using silicon spray on bar and lithium grease on cable end of tube.