Honda-SOHC

SOHC.co.uk Forums => CB500/550 => Topic started by: bruxby-clive on June 14, 2022, 04:17:02 PM

Title: Cable runs
Post by: bruxby-clive on June 14, 2022, 04:17:02 PM
Could someone please confirm the correct cable runs for the clutch and throttle cables on a 500K2. Thanks in advance.
Title: Re: Cable runs
Post by: Oddjob on June 14, 2022, 06:09:15 PM
Check the PDI instruction as there are diagrams for cable routing on there.
Title: Re: Cable runs
Post by: bruxby-clive on June 14, 2022, 09:14:01 PM
Thanks Oddjob.
Title: Re: Cable runs
Post by: deltarider on June 15, 2022, 06:30:04 AM
What is meant by 'PDI'? I had a look at various Pre Delivery and Set up docs, but haven't found a diagram for cable runs.
Title: Re: Cable runs
Post by: Sesman on June 15, 2022, 06:31:33 AM
 Behave yourself 😉
Title: Re: Cable runs
Post by: Oddjob on June 15, 2022, 01:16:27 PM
You can use this.

file:///G:/Bike%20Info/Cb550F%20addendum%20and%20cable%20routing.pdf

It's for a 550 but that's not a big problem, carbs are in the same place.
SimplePortal 2.3.5 © 2008-2012, SimplePortal