Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: Jimbo550 on November 07, 2012, 12:53:27 PM
-
Hi. I've just but the bottom end crank cases back together all bolted up, selector shaft is in and now trying that all gears select correctly before I carry on. As I turn the main shaft by hand in the correct direction I hear the kickstart ratchet. In the other direction the main shaft is locked. What have I done wrong?
-
Don't panic i,ve sorted the problem. Got the kick start ratchet 180 deg out. Thankfully i could dismantle and reasemble from the bottom without splitting the cases.
-
Before you go any further make sure that the leg on the mechanism is in the slot in the crankcase where it is supposed to go!!!
-
The leg is in the slot. I just had the ratchet 180 degrees out. all working fine now.