Honda-SOHC

SOHC.co.uk Forums => CB500/550 => Topic started by: 1stclassdiver on May 25, 2014, 09:02:37 AM

Title: Inlet and exhaust valves
Post by: 1stclassdiver on May 25, 2014, 09:02:37 AM

This may seem to a lot of you like a dumb question but which are the inlet and exhaust valves on my cb500 four K1?
I know where they are but am not sure which is which.

Title: Re: Inlet and exhaust valves
Post by: mick on May 25, 2014, 09:14:10 AM

the ones nearest the carbs are inlet and the ones nearest the exhaust are outlets  ;) cheers Mick

Title: Re: Inlet and exhaust valves
Post by: 1stclassdiver on May 25, 2014, 11:37:41 AM

Thanks for that Mick.

Title: Re: Inlet and exhaust valves
Post by: mick on May 25, 2014, 11:47:34 AM

No probs :-)

Title: Re: Inlet and exhaust valves
Post by: Johnwebley on May 25, 2014, 11:52:02 AM

Quote from: 1stclassdiver on May 25, 2014, 09:02:37 AM

This may seem to a lot of you like a dumb question but which are the inlet and exhaust valves on my cb500 four K1?
I know where they are but am not sure which is which.

if the valves are out of the head,you should have 4 large headed,and 4 smaller,the smaller are exhausts !! and fit at the front of the engine

Title: Re: Inlet and exhaust valves
Post by: 1stclassdiver on May 25, 2014, 12:51:26 PM

Thanks JW