This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - 550turnip
Pages: [1]
1
« on: July 21, 2021, 06:23:13 PM »
Mmm....I might hold back on the apico then and try fitting a new cable first...thanks for the info
2
« on: July 21, 2021, 11:47:17 AM »
Thanks for all your help sohc jedi
3
« on: July 21, 2021, 11:45:36 AM »
I most people would find my bike ok, it's me I am fussy..I just hate heavy throttles and clutches, the spring on the carbs feels way to strong..I am going to look at sourcing another and will install a new clutch cable and try the apico easy clutch..I will go through it all, I have just noticed there is no throttle return cable fitted
4
« on: July 21, 2021, 11:34:01 AM »
I will change the clutch cable and I am sure that will improve things, the throttle cable is new and it's still to heavy, it's annoying on an otherwise lovely bike
5
« on: July 21, 2021, 10:41:07 AM »
The the two main things that bug me about my cb550 k0 are the heavy clutch and throttle, cables are good and oiled so no problems there..do people user a softer spring the carbs, I have seen the apico easy clutch module online..has anyone had any luck with these...any other tips really appreciated.
6
« on: May 08, 2021, 11:00:24 PM »
Thanks for all the help, looks my airbox was stripped of parts at some point, I can never understand why people do this...the result is usually a decree in performance and rough running
7
« on: May 08, 2021, 05:51:39 PM »
I will get the air/oil seperator when onecomes available, I have ordered the air filter.
Thanks for your help
8
« on: May 08, 2021, 03:40:01 PM »
Here is a pic inside the box, current filter has a hole in the bottom of the metal plate that looks like it locates in a tube, the current filter has cb550f on it so I think it will fit ok
9
« on: May 08, 2021, 12:36:48 PM »
Hi
Air filters seem to be a bit thin on the ground for a cb550k0, is the cb550f the same filter but a different part number..my research seems to suggest so !
am I missing some other parts As well, I think there should be an air filter retaining spring and a tool tray above the filter housing.
10
« on: May 08, 2021, 12:33:27 PM »
Hi
Air filters seem to be a bit thin on the ground for a cb550k0, is the cb550f the same filter but a different part number..my research seems to suggest so !
am I missing some other parts As well, I think should be air filter retaking spring and a tool tray above the filter housing.
Pages: [1]
|
Show Posts