Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Matt_Harrington

Pages: 1 ... 5 6 [7] 8 9 ... 56
91
CB350/400 / Points advance unit
« on: November 10, 2023, 09:19:58 AM »
Should one be able to dismantle the advance/retard unit? My spare unit is really stiff and the cam section seems to be reluctant to withdraw from the plate.

92
Desperately Seeking!! / Re: 400/4 RHS switch - part..
« on: November 08, 2023, 11:54:35 AM »
Ted, I'd probably have used red rubber grease as I find this perfect for slipping wires in sheaves etc. But silicone would do the Jon just as well, I'm sure.

93
Desperately Seeking!! / Re: 400/4 Kick start (FOUND)
« on: November 07, 2023, 05:57:27 PM »
Replacement kick start now sorted...

94
Desperately Seeking!! / Re: 400/4 RHS switch - part..
« on: November 07, 2023, 05:54:18 PM »
Tim, you are  star!
I now have everything working however, I'm somewhat baffled by the switchgear before I took it apart!
In short, it appears to be a non OEM part and was missing parts compared to the one you sent me. With a bit of dexterity, I managed to fit the button, spring and mini pcb board from your part and resolder the wires accordingly. Needed to tap one hole for an M4 screw. It certainly wasn't easy but far easier than trying to remove the cables from the inside of the handlebars and replace once fixed. Starter now operating and I'm ready to pop a bit of oil in the rebuilt engine and test the oil pressure.

95
Misc / Open / Re: Motorising bike platform lift action
« on: November 07, 2023, 12:58:15 PM »
I've sent an email to Machine Mart spares department (I've dealt with them before on other bits of kit) and let you know what they say.
My hydraulic ram is like the one removed on the video clip.

96
New Member Introductions / Re: New member
« on: November 07, 2023, 12:35:39 PM »
Bienvenue Hugo!

97
Misc / Open / Re: Motorising bike platform lift action
« on: November 07, 2023, 12:26:43 PM »

98
Misc / Open / Re: Motorising bike platform lift action
« on: November 07, 2023, 11:12:16 AM »
Machine mart do an air assisted ramp. If yours is a Clarke one (or similar) I'm sure you could add this option.
Maybe worth investigating.

[ Guests cannot view attachments ]

In fact, I'm tempted to do that to mine....

99
Desperately Seeking!! / Re: 400/4 Kick start
« on: November 07, 2023, 10:42:18 AM »
Let me know the price you are after and hopefully we can get this organised.

100
Desperately Seeking!! / Re: 400/4 Kick start
« on: November 06, 2023, 06:42:21 PM »
Ha! Typical, just as I am getting close to the finish line.
The current one is longer than it should be and the knuckle is a little strange - someone has cut the spline section as it looks like it was a solid part rather than having a 'pinch' effect when bolted up.  :'(

101
Desperately Seeking!! / 400/4 Kick start
« on: November 06, 2023, 06:16:19 PM »
I have only just realised that the kick start on my bike is wrong!! >:(
Anyone got a decent one they want to sell?

Matt

102
Desperately Seeking!! / Re: 400/4 RHS switch - part..
« on: November 06, 2023, 08:50:35 AM »
Cheers, Tim. By the time it arrives, I'll be ready to take the existing one apart!!

103
Desperately Seeking!! / Re: 400/4 RHS switch - part..
« on: November 05, 2023, 08:07:11 PM »
Thanks Tim - do you have my address still?

104
Tricks & Tips / Re: Bike trolleys/dollys
« on: November 05, 2023, 01:40:32 PM »
The floor is concrete but not that smooth so the larger the wheel the better.
I've adapted my bike ramp so it can go sideways both ends, front was on casters and the rear a solid axle.
I made two brackets up to carry casters and bolted them to the rear.
Works quite well now.

You see, I sometimes don't think out of the box! As I need to replace a seal in my ramp, I'll add the casters the same time - great idea.
As far as 'dollies' are concerned, I'd like to see one that allows the use of a centre stand - my old bikes don't have a side stand. If they did, then maybe this would type do the job:

https://www.ebay.co.uk/itm/314690396630?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A1qPUmyyAzRd6d6naJwinIcQ58&norover=1&mkevt=1&mkrid=710-134428-41853-0&mkcid=2&mkscid=101&itemid=314690396630&targetid=1816181028139&device=c&mktype=pla&googleloc=9044938&poi=&campaignid=19090194174&mkgroupid=147009364227&rlsatarget=pla-1816181028139&abcId=9303860&merchantid=6995734&gclid=Cj0KCQjw-pyqBhDmARIsAKd9XINjQFazRF2g9O94yEOFUYC87qooK-k-T9Pw6yfNignlZo1zJklx0uUaAkpNEALw_wcB

105
Tricks & Tips / Re: Bike trolleys/dollys
« on: November 05, 2023, 11:31:43 AM »
Tim, I've not got a lot of eperience with ones for bikes but the ones I have used for cars are not bad BUT you need to have a decent/smoothish floor.
I'll be interested to see what others think/recommend.

Pages: 1 ... 5 6 [7] 8 9 ... 56
SimplePortal 2.3.5 © 2008-2012, SimplePortal