Honda-SOHC

SOHC.co.uk Forums => CB750 => Topic started by: Trigger on December 01, 2014, 09:18:05 PM

Title: CB750F Rings
Post by: Trigger on December 01, 2014, 09:18:05 PM

Has anyone got a piston ring set from Cruzinimage for a CB750F??? And did it fit the F piston.

Title: Re: CB750F Rings
Post by: JamesH on December 02, 2014, 12:12:52 AM

Pretty sure HondaMan on the us forum has put up quite a few posts about the crusinimage kit. I recall there were some issues with the rings and deburring of the pistons required on some eqrly sets. Purely from memory so worth searching on the us forum Graham. J.

Title: Re: CB750F Rings
Post by: Trigger on December 02, 2014, 08:22:48 AM

Cheers James will have a look.

Title: Re: CB750F Rings
Post by: Seamus on December 02, 2014, 09:25:56 AM

These folk supply rings and stuff if you are looking at replacements.  In the US unfortunately, but nice parts.

http://www.cyclexchange.net/Honda%20Page.htm

Title: Re: CB750F Rings
Post by: stuartni on December 02, 2014, 10:38:11 AM

I will need to double check but I'm pretty I've a complete set of cb750 honda piston rings (not sure if theres any different between years and models). I bought a job lots of parts at an auto jumble and when i checked the part number for them it was for a cb750 think there was oem cb750 piston as well from memory but i shall check and let you know.

Title: Re: CB750F Rings
Post by: Trigger on December 02, 2014, 05:23:40 PM

The CB750F sometimes have different pistons than the 750K and the rings that fit this type of piston are thinner than the 750K.