Honda-SOHC

Currently building another cb550 with a mono shock conversion. Have been doing quite a bit of searching on what fronts end conversions have been done such as

r6
gsxr
fireblade
gl1000 75-77 (direct fit)

Basically wondering what other options are available without going to end of the world an back to make them work.

welcome

You are listing products without any prices

Yes sorry i did do this intentionally incase it looked as if i trying to have a for sale thread in the Announcements section of the site however i shall add prices and should there be an issue i will address it.

Good luck
I have chrome Forsa shocks on my 750 they've been on there for about 2-3 years now only polished them twice as I don't like cleaning and there looking as good as new but more importantly there so much better than the originals.They are rather stiff so I recommend leaving them on the softest setting.   

I could do with enough side panel grommets for two bikes.
Are the 750 fork tubes just for the later K's?

Mick

I Will double check with my supplier in the morning and get back to you

Well as some of you may know after building my cb550 cafe racer and having trouble sourcing certain parts, i always planned to try and start my own small business on the side doing a range of parts for the our beloved cbs. Below will be a rough list of the parts i either have in stock and parts i hope to have in stock soon. If theres anything you after i can certainly check and see if its something i can supply.

Here is the rough list with what photos i have so far most items will be on ebay and hopefully soon my website

£9.99 Rev cable blanking plugs cb450 500t cb500 cb550 and cb750

£14.99 Alloy starter motor delete plugs to fit CB350 Twins (68-72)  CB350G (73)  CL350 (68-73)  SL350 (69-70)  CB360 (74)  CB360G (74)
CB360T (75-76)  CL360 (74-75)  CB450 (68-74)  CL450 (68-74)  CB500T (75-76)

£129.99 cb750 k fork tubes

£29.99 cb550 fuel taps petcocks

£19.99 cb brake rods 470mm long direct replacement

£19.99 cb brake rods 490mm long designed for fitting to aftermarket rear sets etc

£2.70 cb side panel rubbers

£2.70 cb ignition switches

£3.40 EACH tappet covers to fit c50 c70 c90 cb400 cb500 cb550

£11.99 oil pressure switch to fit cb400 cb500 cb550 and cb750
 
I can also get a range of forsa enterprise rear shocks. According to a lot of fellas on the american forum seem to highly rate them. I have only order one set for my cb550 to test them out


excuse some of the photo the quality isn't great better photos to come




This is an alloy adaptor for 70s/80s bmw r70 r80 r100s to convert the speedo drive to fit standard (same as honda clocks) speedos

Ok guys got an issue with one carb overflow. Story goes bike starts and runs lovely sounds perfect but once she is warm carb 3 (from the left when your on the bike) the overflow leaks. Also my petcock  doesnt have the plastic strainer pipe I fella we where speaking to said thiz could be the issue???

i put the 550 version on my cb550 cafe racer cost me near 600 in total with the import duty and tax

Welcome to the site where abouts are you from???