This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - SteveW
556
« on: November 04, 2017, 08:01:51 PM »
Finally sorted the wiring so that all lights and switches work as they should Also the tail light now comes on when the ignition is in the 3rd position. Just got to replace the rectifier and regulator, i assume the rectfifer is toast as the cables to it are melted. The wiring loom will be replaced next year, I'm trying to get it ready for an MOT at present.
557
« on: November 02, 2017, 09:09:45 PM »
More
558
« on: November 02, 2017, 09:08:36 PM »
This is some of the horrors i've found today:
559
« on: November 02, 2017, 07:15:23 PM »
Thanks, very much for the reply.
In the fully clockwise position it does nothing at the moment, the wiring has been very badly bodged.
560
« on: November 02, 2017, 06:11:04 PM »
My US 74 CB550k0 has 3 positions, but only 2 are used. At the moment it seems to be wired off - on - off. Its a genuine Honda ignition switch with a genuine key that works on the seat and tank cap. Is this correct or has someone wired it wrongly? I have a hell of a lot of wiring problems, looks like the bike was rewired by the Chuckle Brothers in the dark.
561
« on: November 01, 2017, 07:55:00 PM »
Hi Charlie,
I've just purchased a 74 CB550, that came from Holgate Ohio.
562
« on: October 31, 2017, 11:01:04 AM »
Thats pretty much what mine looks like, the bit i can see anyway.
I'll replace the entire green cable.
563
« on: October 30, 2017, 09:38:15 PM »
I'm guessing thats whats happened at some point in this bikes life, the green wire is fried.
564
« on: October 30, 2017, 08:58:54 PM »
Yes, that one is in place. One of the few cables that look in reasonable condition.
565
« on: October 30, 2017, 08:41:43 PM »
My wiring is a nightmare, especially the green earth wire which looks as like some heavy current has gone down it at some stage.
The green wire is earthed to the frame just by the coils. Is it earthed to the frame anywhere else?
Thanks.
566
« on: October 30, 2017, 07:11:19 PM »
Hi Topcat, I'm just just down the road from you in Stokenchurch.
I've had my 74 CB550 for 2 weeks, like yours carb issues and bodged electrics.
Steve
567
« on: October 29, 2017, 10:33:31 PM »
This was part of the extended loom to the ignition switch:
568
« on: October 29, 2017, 07:09:22 PM »
I'm just by Junction 5 of the M40 Pic attached. Someone has moved the ignition switch from the side to between the clocks. They have extended the wires by cutting the existing loom in half and inserting randomly coloured bits of wire from god knows what. wires twisted together and a small bit of insulation tape. Same with the horn, more random wire twisted together. Best one, i've just found. The main cable to the starter crushed between the engine case and the chain cover. No wonder i was getting whisps of smoke when i tried to start it
569
« on: October 29, 2017, 05:10:46 PM »
Hello from Bucks, Just bought a 1974 CB550 US spec, non runner.
Ive had it 2 weeks, carbs full of crud and numerous electrical issues.
Borrowed an ultrasonic cleaner, cabrs are now gleaming and bike starts and runs.
Now the fun begins, trying to sort all the electrical problems and getting an MOT on it.
Steve.
|