Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: firet49 on March 14, 2017, 11:33:41 PM
-
Hi
Can anybody tell me what the clip on the underside of the bottom yoke is for.
Thanks
-
If its the one I think you mean its to hold the speedo cable.
-
Think that one is to support the wiring harness before it enters the headlight.
-
Think that one is to support the wiring harness before it enters the headlight.
It is on the 400/4 but don't know on this one.
-
Wiring harness sounds right. Is it part 1 on this diagram?
[attachimg=1]
-
Can anybody with a 550f confirm their wire harness is under the yokes through this clip.
Seems strange to me.
Thanks
-
Is this the one
(http://i1074.photobucket.com/albums/w419/pearmanandson/SAM_0307_zpsenzmpqdj.jpg) (http://s1074.photobucket.com/user/pearmanandson/media/SAM_0307_zpsenzmpqdj.jpg.html)
-
Mick he has a different 550 ;)
-
Same bike different exhaust :P
-
Your is not a UK 550F ;D
-
Fair enough I didn't even notice it was a F
Still basically the same bike if you squint a lot.
-
Fair enough I didn't even notice it was a F
Still basically the same bike if you squint a lot.
Squint a hell of a lot, and after 5 pints... it still will not look the same ;)
-
Just googled it and know the clip your on about now.
You can clearly see it on a bike on eBay without the cable in it
I would post a link but laptops just updated and now it wont do anything properly ::)