Honda-SOHC

SOHC.co.uk Forums => CB350/400 => Topic started by: llessur on June 10, 2018, 12:52:33 PM

Title: Clutch cable adjuster
Post by: llessur on June 10, 2018, 12:52:33 PM

Can anyone please point me towards a supplier of the M10 x 1.25 clutch cable adjuster that sits on the clutch casing. - been struggling with this for several months now to the point it has become one of the last jobs to get the bike finished.

Title: Re: Clutch cable adjuster
Post by: Orcade-Ian on June 10, 2018, 01:23:20 PM

Have you tried http://www.400fourbits.co.uk ?

Ian

Title: Re: Clutch cable adjuster
Post by: llessur on June 10, 2018, 02:29:30 PM

No joy there I'm afraid. but Steve has helped me with many other bits

Title: Re: Clutch cable adjuster
Post by: Orcade-Ian on June 10, 2018, 07:41:21 PM

Is yours missing or just not upto standard?  You don’t actually see the hex on the adjuster as it’s covered with a sleeve, only the nut is visible.  It’s not a difficult item to make on the lathe but I don’t have a 1.25 die, only the more normal 1.5.  A local engineering shop might help you - I can supply dimensions.  I would go stainless if I was making one but make sure you put copper slip or similar where it goes into the alloy cover.


Ian

Title: Re: Clutch cable adjuster
Post by: eem46 on June 11, 2018, 06:57:59 AM

Hi, maybe a very nice Aftermarket Stainless steel version from Kevin (TTR400).

Kind regards,

Emiel

Title: Re: Clutch cable adjuster
Post by: rockvegas400 on June 12, 2018, 12:13:50 AM

I got a stainless one from Phil Denton a few years ago. It was reasonably priced, even shipped to Oz.

https://www.phildentonengineering.com/index.html

Cheers,

Justin

Title: Re: Clutch cable adjuster
Post by: ka-ja on June 12, 2018, 09:01:32 PM

I have one if you are interested