Honda-SOHC

SOHC.co.uk Forums => CB350/400 => Topic started by: paddyz1 on October 03, 2018, 11:50:45 AM

Title: Rim offset
Post by: paddyz1 on October 03, 2018, 11:50:45 AM

Just laced up a front rim on a friends 400/4. He had already stripped it so i got it in bags.
Is there an offset on the wheel?
All nipples are hand tight with no strain yet and all have an even amount of threads showing. In its natural un-tightened state there is a small amount of offset, appox 2 or 3mm.
Can anyone tell me it the 400/4 has an offset or should i centralise the rim to the hun?
Thanks

Title: Re: Rim offset
Post by: Bryanj on October 03, 2018, 03:49:47 PM

No offset

Title: Re: Rim offset
Post by: Moorey on October 04, 2018, 05:33:05 PM

Do any of the old Honda's have any offset.

Title: Re: Rim offset
Post by: Bryanj on October 04, 2018, 08:31:12 PM

None of the ones i worked on from 74

Title: Re: Rim offset
Post by: Moorey on October 04, 2018, 08:46:09 PM

Quote from: Bryanj on October 04, 2018, 08:31:12 PM

None of the ones i worked on from 74

I thought not.