Recent Posts

Pages: [1] 2 3 ... 10
1
CB500/550 / Re: Rear brake hub anchor bar clip 94251-08000
« Last post by Bloggs on Today at 05:10:42 PM »
Ted,

Sent you a PM.
2
CB500/550 / Re: Rear brake hub anchor bar clip 94251-08000
« Last post by taysidedragon on Today at 05:10:33 PM »
Quote from: McCabe-Thiele (Ted) on Today at 05:03:13 PM
Thanks, interestingly the download parts book shows an R clip at the hub end & a split pin at the frame end!

That's so you can quickly disconnect the hub end to remove wheel. No need to disturb the frame end.
3
SOHC Singles & Twins / Re: CB360 Wiring question
« Last post by ozzybud on Today at 05:10:13 PM »
The light green/ red needs to find its way into the headlight bucket and plug into the gauge feed wires. It travels from the switch under the left side cover. Terminating at the bulb@ the neutral light.
4
SOHC Singles & Twins / Re: CB360 Wiring question
« Last post by Craizeehair on Today at 05:06:25 PM »
Thanks Bryan, I can see that brown wire now on the UK wiring diagram, makes sense even to me.
5
SOHC Singles & Twins / Re: CB360 Wiring question
« Last post by McCabe-Thiele (Ted) on Today at 05:04:20 PM »
The 360 ones on eBay look quite different.
6
CB500/550 / Re: Rear brake hub anchor bar clip 94251-08000
« Last post by McCabe-Thiele (Ted) on Today at 05:03:13 PM »
Thanks, interestingly the download parts book shows an R clip at the hub end & a split pin at the frame end!
7
CB500/550 / Re: Rear brake hub anchor bar clip 94251-08000
« Last post by Bryanj on Today at 04:53:19 PM »
Those were originally split pins Ted but i think i fitted R clips, i have boxes of assorted ones
8
CB500/550 / Re: Rear brake hub anchor bar clip 94251-08000
« Last post by Bloggs on Today at 04:52:19 PM »
Hi Ted,

These are known as 'R' pins.
Lots of vendors
Model Fixings do them in zinc plate  https://www.modelfixings.co.uk/r_clips.htm
Bolt World do them in STainless   https://boltworld.co.uk/product-category/fasteners/engineering-keys-and-pins/pins-clips/r-clips/?_gl=1*12jaxfs*_up*MQ..&gclid=EAIaIQobChMIo_PU6beDhgMVnqODBx22nA7lEAAYAiAAEgLXFfD_BwE

I have used both vendors and been happy with both.

Other vendors are out there....

Michael
9
SOHC Singles & Twins / Re: CB360 Wiring question
« Last post by Bryanj on Today at 04:49:54 PM »
Brown wire goes to the small bulb in headlight in uk which is not fitted in us, unfortunately it is a requirement to have an "obgliatory" light in uk and would fail mot if not there plus if you got a knowlegable plod( both words in one sentence) it could be an offence.
Depending on light size there are plenty of units out there.

Green and red may be neutral switch to idiot light wire
10
SOHC Singles & Twins / Re: CB360 Wiring question
« Last post by Craizeehair on Today at 04:45:06 PM »
Just had a real quick look before we get ready to go out and it seems as though these early bikes might not have had a clutch switch.

There’s also a brown wire and a green and red wire both free and not connected in the headlight bucket and after a really quick look at the wiring diagram I think these may not be connected to anything either, could be pains over if I’m lucky???

Will have a few hours to muddle through something tomorrow, thanks for all the input, much appreciated.
Pages: [1] 2 3 ... 10
SimplePortal 2.3.5 © 2008-2012, SimplePortal