Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: paulbaker1954 on July 13, 2018, 12:27:53 AM
-
Has become somewhat sticky and jumpy above 60
Know cable and drives and cushions are all ok
Is there a way of lubricating the internals without stripping it?
-
Short answer no, it will probably end up on the inside of the glass and the only lubricant they contain is a small amount of grease on mileage counter gears.
You could test the gauge with a power drill that has a reverse facility connecting an old cable between the two running it up to speed. This isn't a definitive test as the gauge isn't then subjected to the vibration it is when fitted.