Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: AndyH on June 25, 2017, 11:14:46 AM
-
Folks, I know that many queries of this kind have been posted before, but none have specifically given an answer to the subject question. :( I've seen many posts, diagrams, photos etc. that have shown 350/400/550/750 harness routing, but nothing which has shown the factory routing for a CB500 be it K0, 1 or 2.
I'd really like to get the routing as close to original as possible, including where the loom clips are located.
CMSNL doesn't really show it to detail, and from my research, none of the shop manuals do either.
Anyone able to help please?
-
Either on here or the US site are the build sheet and PDI instructions that I sent. They give the clearest pictures
-
Either on here or the US site are the build sheet and PDI instructions that I sent. They give the clearest pictures
Fine Bryan, but what do I search on? I've tried all the sensible search questions to no avail!
-
I've got a set up manual here ill take a pic
-
Not great pics but is this what you were after
-
Search for PDI instructions and Build Manual.Link below, there are some pictures in the genuine Honda manual that show routes but not necessarily in the wiring section you have to look at all the pictures.
http://manuals.sohc4.net/cb500/
-
Thanks Woodside, they help for sure.
Bryan, I'll check out the link to see what I can find, thanks.