Post by: paul G on July 26, 2017, 08:18:02 AM
All going well up to now will post some more pictures as it goes along.
Thanks to Graham (Trigger) for the superb job on the engineering side of things :D
Hopefully I will get it finished at the weekend.
(http://i.imgur.com/MuLM0Bx.jpg)
(http://i.imgur.com/zqslovC.jpg)
(http://i.imgur.com/xe4dcTZ.jpg)
(http://i.imgur.com/xAYi6LS.jpg)
(http://i.imgur.com/dPcbMlV.jpg)
Post by: Laverda Dave on July 26, 2017, 02:28:00 PM
Have you had the carbs apart? Since I had mine ultrasonically cleaned and vapour blasted the engine will not tune properly. When it does eventually start its runs really rough, good luck with yours :).
Post by: paul G on July 26, 2017, 03:44:30 PM
Looking good Paul, keep the photos coming.
Have you had the carbs apart? Since I had mine ultrasonically cleaned and vapour blasted the engine will not tune properly. When it does eventually start its runs really rough, good luck with yours :).
Yep I bought a cleaner myself and did them a while ago.
More than likely the float height, did you buy new needle valves and jets !
Post by: paul G on July 28, 2017, 08:21:20 AM
Thanks again to Graham (Trigger) for the superb work carried out on it.
(http://i.imgur.com/c2mkDdD.jpg)
(http://i.imgur.com/KAfQoNW.jpg)
(http://i.imgur.com/DQcQs5s.jpg)
(http://i.imgur.com/GrAencr.jpg)
(http://i.imgur.com/2G6idBK.jpg)
Post by: Laverda Dave on July 28, 2017, 09:25:49 AM
Post by: Seabeowner on July 28, 2017, 09:38:46 AM
Engine looks lovely and clean inside and out. (Cruzinimage pistons?)
Post by: paul G on July 28, 2017, 09:40:53 AM
Probably be raining! Was away in Europe when all the good weather was on here and now I'm back it's always raining.
Engine looks lovely and clean inside and out. (Cruzinimage pistons?)
(Cruzinimage pistons?) Yep
Post by: royhall on July 28, 2017, 05:19:26 PM
Post by: paul G on July 28, 2017, 10:20:08 PM
Paul. Are they Cuzinimage inlet rubbers, they look like it. Dont use them they will only last about 300 miles until the rubber cracks around the aluminium insert. Had Ash soften my originals for me and they work much better. Will post some pictures of the damage later.
No they are from Silvers so if they do then he will be getting them back 😡😡
Post by: paul G on July 29, 2017, 06:47:19 PM
(http://i.imgur.com/VgvusnT.jpg)
(http://i.imgur.com/MizYJvr.jpg)
(http://i.imgur.com/qIHoSW9.jpg)
(http://i.imgur.com/flfT0GN.jpg)
Post by: Nurse Julie on July 29, 2017, 06:52:22 PM
Post by: paul G on July 29, 2017, 07:33:22 PM
Well done Paul, your bike looks great.
Thanks Julie, now off out for a well earned pint or two or three or more.
It's good for diabetes as well now ;D ;D ;D ;D
Post by: Nurse Julie on July 29, 2017, 07:36:44 PM
Bollocks is it...... but enjoy anyway 😊😊😊Well done Paul, your bike looks great.
Thanks Julie, now off out for a well earned pint or two or three or more.
It's good for diabetes as well now ;D ;D ;D ;D
Post by: mike the bike on July 29, 2017, 08:40:20 PM
Post by: hairygit on July 29, 2017, 08:41:11 PM
You obviously didn't watch the BBC breakfast news yesterday nursey, the experts now think alcohol can prevent people getting diabetes! They done a long term test and that was their conclusion!Bollocks is it...... but enjoy anyway 😊😊😊Well done Paul, your bike looks great.
Thanks Julie, now off out for a well earned pint or two or three or more.
It's good for diabetes as well now ;D ;D ;D ;D
Post by: Nurse Julie on July 29, 2017, 08:51:55 PM
Post by: hairygit on July 29, 2017, 08:56:33 PM
Sent from my X6pro using Tapatalk
Post by: Nurse Julie on July 29, 2017, 09:00:59 PM
Post by: hairygit on July 29, 2017, 09:14:36 PM
Sent from my X6pro using Tapatalk
Post by: Nurse Julie on July 29, 2017, 09:23:03 PM
Post by: Woodside on July 29, 2017, 09:56:01 PM
That quote fits rather neatly in this thread
Post by: Nurse Julie on July 29, 2017, 09:58:58 PM
Post by: Laverda Dave on August 04, 2017, 11:43:52 PM
Post by: royhall on August 05, 2017, 08:06:36 AM
[attachimg=1]
[attachimg=2]
[attachimg=3]
[attachimg=4]
Post by: paul G on August 05, 2017, 03:44:14 PM