Honda-SOHC
General => New Member Introductions => Topic started by: Moxey on October 03, 2017, 08:15:06 PM
-
Hi all (Y)
Just recently acquired myself a 1978 CB750 F2 last month from a friend.
(https://i.imgur.com/KRQQEf4.jpg)
After two days of fiddling got an MOT on it and took it for a look to Seaton Carue
(https://i.imgur.com/Mn23iHZ.jpg)
I had hoped to run it up to the Tan Hill bike show this month but unfortunately a previous owner appears to have misplaced an oil seal and what was a slight weep has matured requiring a bit of a strip down, no problem as I was expecting to strip it anyway (surprised how little needs doing really for what I originally expected).
Also have 2 other Hondas, a 1977 CG and a more up to date sohc single a NX 400 Falcon.
-
welcome to the fun world of sohc !!
great pictures ,and nice bike,
lots of fun and friendly advice here
enjoy
-
Welcome to the forum.
-
Welcome - lovely bike - loads of F2 guru's on here to help (don't mention PD carbs otherwise you'll set them off on one!)
Phil
Sent from my MotoG3 using Tapatalk
-
Welcome to the forum and the world of sohc.
-
Welcome to the mad world of the SOHC, enjoy ;)
-
Welcome to the forum.
Nice bike, looks good in the picture on the prom.