Honda-SOHC
Other Stuff => Desperately Seeking!! => Topic started by: gaz172 on November 15, 2023, 07:00:40 PM
-
i'm looking for a cam chain bar does anyone know where i could find one
-
i'm looking for a cam chain bar does anyone know where i could find one
I assume you mean the tensioner(s) DS used to list them iirc.
-
Hi,
If you have a look on the CMSNL site - Honda - CBFours - CB 400 and see if you can find the description and part number of what you need, then one of us might have something. Or as Ted says, DS might have something,
Ian
-
It's the push bar, p/n14550333000
I've had a look here but haven't got any left.
[attachimg=1]
-
Ah the plunger rod might be worth checking with Steve on 400fourbits he has a lot of odd stuff.
-
Check the 250/360 G5 &T parts fiche as well as they used a similar system and you may find a used one of those easier, especially in US, dont forget the 350 four
-
What about 14550-369-020. Looks almost the same just not got the rubber end on it.
https://www.cmsnl.com/products/barcam-chain_14550369020/
-
Thats the 250/360 part
-
From accounts on the web it will fit and it may even be an improvement
-
What about 14550-369-020. Looks almost the same just not got the rubber end on it.
https://www.cmsnl.com/products/barcam-chain_14550369020/
i think i will try that thanks
-
From what I've read the 369 part has a larger flat spotted area where the lock bolt engages, that could mean more adjustment is possible
-
Ive got an OEM cam chain tensioner? Its done about 6k....
-
It's the push bar, p/n14550333000
I've had a look here but haven't got any left.
I looked in the same place the other day Julie, same answer off course, I hope it isn't an 'orphaned' item. My bike goes in for a rebuild tomorrow primarily because the gaskets are leaking like a Brit bike but I've bought in a new cam chain and all tensioner items horseshoe included, however I have to hope & pray the push bar is actually ok. ::) I've tried everywhere I can think of except to ask DS if they have a 2nd hand one. I've had a couple of used parts of DS.
-
Ah the plunger rod might be worth checking with Steve on 400fourbits he has a lot of odd stuff.
Nope, I checked!
-
To be honest George, there isn't much that can go wrong with the push bar, hopefully yours will be OK.