Honda-SOHC
Other Stuff => Desperately Seeking!! => Topic started by: fourfive on June 05, 2022, 12:15:31 AM
-
CB550 K3 outer carb to air box rubber. Has anyone got a spare one to sell me?
Thanks in advance
-
There was a member on the us site making sets for the k3
-
That's Paul Gabor.
email mybluebike2004@yahoo.com
Bought the two outer ones in 2016. OK, but you need extra care with them.
I wondered about using the boots from the earlier bikes and moving the chamber forwards. Maybe making an extra ring between air filter box or modding the whole mounting.
-
Its the angle of the outers that is different to fit the pd carbs
-
That's Paul Gabor.
email mybluebike2004@yahoo.com
Bought the two outer ones in 2016. OK, but you need extra care with them.
I wondered about using the boots from the earlier bikes and moving the chamber forwards. Maybe making an extra ring between air filter box or modding the whole mounting.
Thanks for the reply, I'll send him an email, see what's available
-
Its the angle of the outers that is different to fit the pd carbs
I've got a pair of earlier inlet manifolds from a f1, these look deeper than the k3 so would make the carbs sit closer to the air box. Am I right in thinking the f1 carb to air box rubbers would then fit? Or is it not that simple.
I'd like to keep things original if possible
-
Only if you fit the F1 carbs as well and the carb to manifold rubbers
-
That's Paul Gabor.
email mybluebike2004@yahoo.com
Bought the two outer ones in 2016. OK, but you need extra care with them.
I wondered about using the boots from the earlier bikes and moving the chamber forwards. Maybe making an extra ring between air filter box or modding the whole mounting.
I had a set off him for the K3 really good quality.
He was a bit reluctant to post to the UK due to a couple of bad experiences but mine arrived OK.
-
That's Paul Gabor.
email mybluebike2004@yahoo.com
Bought the two outer ones in 2016. OK, but you need extra care with them.
I wondered about using the boots from the earlier bikes and moving the chamber forwards. Maybe making an extra ring between air filter box or modding the whole mounting.
I had a set off him for the K3 really good quality.
He was a bit reluctant to post to the UK due to a couple of bad experiences but mine arrived OK.
I've ordered a set from the above, thanks for the replies
-
That's Paul Gabor.
email mybluebike2004@yahoo.com
Bought the two outer ones in 2016. OK, but you need extra care with them.
I wondered about using the boots from the earlier bikes and moving the chamber forwards. Maybe making an extra ring between air filter box or modding the whole mounting.
I had a set off him for the K3 really good quality.
He was a bit reluctant to post to the UK due to a couple of bad experiences but mine arrived OK.
I've ordered a set from the above, thanks for the replies
Update
Rubbers arrived today, very Good quality