1
SOHC Singles & Twins / CB100 K1 Electrical issues
« on: June 16, 2023, 07:33:51 PM »
I am currently having electrical issues with my CB100 K1; some of which are on going and some new!! I will list.
1) When the brakes are applied the indicators (winkers) virtually stop working.
2) The bike runs but after around five minutes just stops with a complete loss of electric power. leave the bike for a few minutes and the electrics are ok again.
Since being imported from the USA I have:
(a) fitted a new wiring loom
(b) cleaned all connections
(c) replaced the Selenium rectifier with a solid state on
(d) fitted the correct battery
Any ideas as to the root cause of the fault(s)s and possible solutions.
Richard
1) When the brakes are applied the indicators (winkers) virtually stop working.
2) The bike runs but after around five minutes just stops with a complete loss of electric power. leave the bike for a few minutes and the electrics are ok again.
Since being imported from the USA I have:
(a) fitted a new wiring loom
(b) cleaned all connections
(c) replaced the Selenium rectifier with a solid state on
(d) fitted the correct battery
Any ideas as to the root cause of the fault(s)s and possible solutions.
Richard