Recent Posts

Pages: [1] 2 3 ... 10
1
Humour / Re: Wife bought me some new tools.
« Last post by Athame57 on Today at 12:28:44 AM »
I hope you had a hippy bathday Ted, those tools will have your engine running sweetly!  ;D
2
Humour / Re: Wife bought me some new tools.
« Last post by Laverda Dave on May 16, 2024, 11:23:40 PM »
Happy Birthday Ted  :).
Is the tool second from left a tattoo removal tool?
3
CB500/550 / Re: Henry Coles 550K3 for sale
« Last post by Johnny4428 on May 16, 2024, 10:09:04 PM »
Descent looking bike even without the proper exhausts, but as Mick says those tank decals are awful! Not even close to what they should look like.
4
CB350/400 / Re: Engine assembly questions/tips
« Last post by Nurse Julie on May 16, 2024, 10:05:59 PM »
Quote from: Dolomite_ on May 16, 2024, 09:37:14 PM
So just a drop of oil in the cylinders too?
Graham would have left lube on the bores after he did the rebore for you Lukas. Either Graphogen or red  lube guard.
5
CB350/400 / Re: Engine assembly questions/tips
« Last post by Dolomite_ on May 16, 2024, 09:37:14 PM »
So just a drop of oil in the cylinders too?
6
Out & About / Re: OUT AND ABOUT 2024
« Last post by Johnwebley on May 16, 2024, 09:33:16 PM »
Quote from: Bryanj on May 16, 2024, 08:13:30 PM
John, DO NOT pretend to be a coach in Bourton, they are now banned and not allowed to park!!!
Damn

I shall have to remove the long body and twin rear axles

Is Birdlip open 24/7 ?



Sent from my SM-A546E using Tapatalk

7
Misc / Open / Re: It's been a Shite yesr
« Last post by Johnny4428 on May 16, 2024, 09:24:49 PM »
Bryan that’s a bloody raw deal you have been dealt with in terms of your family etc, but it’s testament to you for your unwavered and continued assistance through the forum to assist people with comparably trivial problems. Well done for that and all the best mate!
8
Misc / Open / Re: What happens if an exhaust mounting stud snaps off?
« Last post by Athame57 on May 16, 2024, 08:45:29 PM »
In the end only three got changed. At some point I'm going to need to take the head off again as cylinder # 4 has a scratch in it and a rebore looms, that would be a better time to deal with this.
9
Project Board / Re: Project CB350F
« Last post by Bryanj on May 16, 2024, 08:15:29 PM »
You should find the spring washer will fit over the plain shank of the bolt but the plain washer will not
10
Out & About / Re: OUT AND ABOUT 2024
« Last post by Bryanj on May 16, 2024, 08:13:30 PM »
John, DO NOT pretend to be a coach in Bourton, they are now banned and not allowed to park!!!
Pages: [1] 2 3 ... 10
SimplePortal 2.3.5 © 2008-2012, SimplePortal