1
CB350/400 / Re: Wiring
« on: May 23, 2024, 07:43:33 PM »
Yes that's what I thought. Thanks for your help Ted 👍
Try our new info resource - "Aladdin's Cave" (Main menu)
Just added a separate link to Ash's Dropbox thread (shortcut)
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
CB350/400 / Re: Wiring« on: May 23, 2024, 07:43:33 PM »
Yes that's what I thought. Thanks for your help Ted 👍
2
CB350/400 / Re: Wiring« on: May 23, 2024, 05:15:06 PM »
Ted, so what your saying I have to solder a green earth wire to the inside of the indicator earthing plate and run that to the loom?
3
Hi all,
I'm restoring a 1978 CB400 4F and I'm onto the wiring. The previous owner botched up the wires by using any colour, I have put it back to original colours as per manual. My question is I can see how the rear indicators are earthed but can't see how the front is earthed? Manual shows Light blue / green on right hand side and orange and green on left hand side, I only have one wire coming from each indicator? Does anyone who owns same model live near Southport, Merseyside so I could have a look? Thanks in advance ☺️ 4
New Member Introductions / Newby« on: March 24, 2024, 11:35:49 AM »
Hi all,
My name is Ste and I'm from Southport, Merseyside. I bought a CB400 Four last year as a project, most of it was in boxes but im slowly getting around to putting it back together. The bike was not original as I thought, I did get a parts manual with it so I'm sourcing all parts to get it back to standard. Only pictures I have are for the strip down and rebuild, I will put a picture of the finished project (but it may take a while) as soon as I've finished it.
Pages: [1]
|