Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: Dave1234 on August 19, 2016, 09:26:47 AM
-
Morning, could someone please tell me the size of the bleed nipple on the front caliper.
Cheers
-
What bike as they vary
-
CB550K3
Cheers
-
I think those are m7 with an 8mm hexagon--DO NOT try and undo one that has been in there for a long time without warming the caliper housing and also use a long socket with a T bar so you don't put uneven stress on the thread
-
DO NOT try and undo one that has been in there for a long time without warming the caliper housing and also use a long socket with a T bar so you don't put uneven stress on the thread
Yep, you can't be careful enough.
-
If you have to buy new bleed nipples, buy those for a CB250N Super Dream as they're a 10mm hex with the same size threaded part.