Honda-SOHC

General => New Member Introductions => Topic started by: Jonny on June 22, 2018, 04:12:01 PM

Title: newbie
Post by: Jonny on June 22, 2018, 04:12:01 PM

Hi all,

 Have been mooching on here for a while so thought I would introduce myself.  I have a 1976 750 in the shed. Sometime in the past the frame has been chopped about, some of the work quite scary to say the least and it hasn't run in many years. The plan is to make sure the frame is safe and then take it from there. Obviously the engine will be opened up and checked over but amazingly it still turns over on the kickstart after many years of it being sat outside under a tarp. I'm sure I will be asking many questions and seeking advice in the months to come.

 I also have a cb 400N that again is in bits.. (bit of a theme). That again isn't standard at all and will hopefully be finished in the next month or 2.

 So a big hello from me

Title: Re: newbie
Post by: mike the bike on June 22, 2018, 04:50:40 PM

Welcome to the forum Jonny,  loads of useful info, tips, horror stories and general banter on here.  Got any photos?

Title: Re: newbie
Post by: Moorey on June 22, 2018, 04:51:44 PM

Welcome to the forum and have fun.

Title: Re: newbie
Post by: Johnwebley on June 22, 2018, 04:53:00 PM

  Hi Jonny,welcome to the fun forum,

  lots of help and advice here ,

   we like lots of pics about bikes and rebuilds

Title: Re: newbie
Post by: Jonny on June 22, 2018, 07:13:45 PM

Thanks for the welcome guys.  I shall get some photo's posted

Title: Re: newbie
Post by: philward on June 22, 2018, 08:25:05 PM

Welcome Jonny - Enjoy the forum

Title: Re: newbie
Post by: Laverda Dave on June 23, 2018, 10:52:41 AM

Welcome to the 400/4 forum Johnny    ;)

Title: Re: newbie
Post by: Paulreade on June 23, 2018, 11:26:37 AM

Where in Cheshire jonny ?
Regards
Paul

Title: Re: newbie
Post by: Jonny on June 27, 2018, 10:23:24 AM

Hi Paul,

 I'm right by Delamere forest, near Chester