Honda-SOHC
SOHC.co.uk Forums => CB350/400 => Topic started by: blackeagles on April 03, 2019, 10:00:43 AM
-
ok, nearly there but whoever owned this bike before also had the wrong clutch cable adjuster - its seems to be m10 x 44 but this one is m8 so they just added a couple of nuts to stop it going into the clutch case.
anyone know where i can find the correct adjuster and nut - m10 x 44, 22818-354-000 and 94001-10000-0S 10mm hex???
i know there is a stainless one on ebay at £19 which i think is a bit pricey and its aftermarket (but beggers can't be choosers!) but if anyone has seen one advertised elsewhere or knows someone who has a couple then let me know.
-
I bought a S/S item on ebay, reassuringly expensive but at least it hasn't gone rusty! Actually £19 isn't a bad price considering they are hand made from stock bar, that's only the price of four pints of beer (or three pints at central London prices!).
-
I'd go on ebay and get it! I had this issue myself, I only realised when the new clutch cable I got wouldn't pass thru it. I ended up paying more than £50.00 getting one from the US. ::)
-
I still have one in my desk drawer from the last time this topic was aired, needs replating for the purist, but perfectly usable.
-
I still have one in my desk drawer from the last time this topic was aired, needs replating for the purist, but perfectly usable.
drat, just bought one!