Recent Posts

Pages: [1] 2 3 ... 10
1
Out & About / Re: OUT AND ABOUT 2024
« Last post by Nurse Julie on Today at 06:48:45 PM »
Lovely day out for a bimble around the Wolds.

[ Guests cannot view attachments ]
2
Misc / Open / Resizing picture facility
« Last post by SteveD CB500K0 on Today at 06:47:40 PM »
I could increase the maximum size allowed. We have never busted the storage limit so I’m willing to risk it.

What size should I use?

RAW images from my son’s wedding in December ran to about 18Mb each (there were 600 of them).

I could raise it to 5Mb. Would that be enough?


Sent from my iPhone using Tapatalk
3
Misc / Open / Re: Resizing picture facility
« Last post by Orcade-Ian on Today at 06:46:43 PM »
Thanks Johnny,
I'll give it a try - I was just out on the 550 today and wanted to post a bit about the trip.

Ian
4
Misc / Open / Re: Resizing picture facility
« Last post by Johnny4428 on Today at 06:35:25 PM »
Ian, I had exactly the same problem, I posted on here maybe about 3 to 4 weeks ago. The easiest way I found round it was to screen shot the pics and post the screen shot, there was quite a few suggestions on here to get round it too. Annoying!😡
5
CB500/550 / Re: 1975 CB500K1 crank rotation resistance
« Last post by McCabe-Thiele (Ted) on Today at 06:20:05 PM »
A bit of a head scratcher - not trying do doubt your ability - are you sure when you fitted  the main shells in the correct  main bearing positions as number 1 main is then on your right when inverted.
6
Misc / Open / Resizing picture facility
« Last post by Orcade-Ian on Today at 05:58:47 PM »
Hi folks,
I've been using the picture resizing facility when posting but it seems to have disappeared now.  I usually take pics with iphone or ipad which are often over the 3Mb limit and in the past you were able to choose a smaller size after you had selected the desired image.  Is there an easy way around this?

Ian
7
CB500/550 / Re: Swinging arm bushes
« Last post by Laverda Dave on Today at 05:51:11 PM »
Yes you do Steve. They are dust seals and they also have a rubber seal on the inside to keep the swing arm grease in.
8
Misc / Open / Re: Advice sought, modernish tourer needed
« Last post by Laverdaroo on Today at 05:46:47 PM »
Top man, the trumpets are great bikes, fingers crossed you find the dosh and get you’re new whip


Sent from my iPhone using Tapatalk
9
CB500/550 / Re: Swinging arm bushes
« Last post by SteveW on Today at 05:39:42 PM »
I have a set of the bronze bushes from Julie I’m about to install.
Do I still need the caps, item 15 in the picture?
10
CB500/550 / Re: 1975 CB500K1 crank rotation resistance
« Last post by martin_uk on Today at 05:33:15 PM »
Quote from: McCabe-Thiele (Ted) on Today at 10:53:41 AM
Does the crank have that free movement feel if you make a very small rocking action with the crank?

Do you have any doubts that the crankcase halves were a factory pair?

I will check for end float.

Pretty sure halves original
Pages: [1] 2 3 ... 10
SimplePortal 2.3.5 © 2008-2012, SimplePortal