Honda-SOHC

SOHC.co.uk Forums => CB750 => Topic started by: yozzer74 on September 11, 2016, 07:17:17 PM

Title: F2 front sprocket
Post by: yozzer74 on September 11, 2016, 07:17:17 PM

Hi just gone to fit my front sprocket but I've forgot which way it goes .I'm sure I've seen a thread on this before but I can't find it .also what length 8mm bolt hold it on and washer .can't seam to find them .and can't see them on parts finch .thanks in advance yozzer

Title: Re: F2 front sprocket
Post by: Yurkie on September 12, 2016, 08:39:08 AM

I can have a look at my bikes front sprocket tonight.


Sent from my iPhone using Tapatalk

Title: Re: F2 front sprocket
Post by: yozzer74 on September 12, 2016, 08:41:30 AM

Thanks

Title: Re: F2 front sprocket
Post by: Yurkie on September 12, 2016, 08:51:08 PM

Hi, I had a quick look and my sprocket has the flat side to the outside. But this is on a none runner that I brought last year, so I am assuming the previous only sold it with it on the correct way round.


Sent from my iPhone using Tapatalk

Title: Re: F2 front sprocket
Post by: yozzer74 on September 12, 2016, 09:16:33 PM

Cheers for that that's the way I was thinking

Title: Re: F2 front sprocket
Post by: royhall on September 12, 2016, 11:29:40 PM

The boss on the sprocket goes inwards and the flat side outwards. It's essential to get right as the chain on the F2 is larger than the K's and if the sprocket is the wrong way the chain rubs the crankcase badly. The clearance between cases and chain is only about 1mm.

Title: Re: F2 front sprocket
Post by: Yurkie on September 13, 2016, 08:38:22 AM

Thanks for confirming mine's on correctly as well


Sent from my iPhone using Tapatalk