Honda-SOHC
Other Stuff => Interchangeability => Topic started by: Moorey on March 20, 2017, 06:14:48 PM
-
As its getting harder to find rear master seal kits for the 750f1 the 2 piston seals are the same as the ones in the front master cylinder. Both cylinders measure 14mm and both pistons 13.8mm.
-
Early GL1000 rear master cylinder seal kit 43510-371-305 will replace master cylinder seal kit 43510-392-305 for 1976 CB750f all it requires is 6mm cutting off the threaded pushrod.
-
I think I might invest in one as insurance for the future.
Cheers
Dennis
-
I am not quite as bothered now I know the front master seals are the same and easily available.